SKCN 216 - CNC with Machining Applications

Credits: 4
Instructional Contact Hours: 4

Emphasizes the programming methodology for producing quality parts using the CNC machines. Discusses conversational programming language with secondary emphasis on tooling setups, part setups, and machining. Utilizes horizontal and vertical machining center for program testing. Credit may be earned in SKCN 216 or CNC 216 but not both.

Prerequisite(s): MS 181W (or SKTR 181W) and MTH 103 (or SKMA 103 or MT 110), or instructor permission
Corequisite(s): None
Lecture Hours: 0 Lab Hours: 60
Meets MTA Requirement: None
Pass/NoCredit: No

Outcomes and Objectives

Write a program for the CNC control.
1. Learn machine format using the manufacturer's programming manual
2. Find and apply canned cycles using the manufacturer’s programming manual
3. Enter a program into the control using the manufacturer’s programming manual as a guide
4. Learn machine’s control panel layout and functions using the manufacturer’s operation manual
5. Determine depth of cut
6. Determine width of cut
7. Calculate feed rate
8. Calculate spindle speed
9. Locate required surface finish on the part print
10. Calculate the surface finish
11. Calculate spindle horsepower
12. Down-load/Up-load part program(s) from/to the control
Set up the machine to cut the part.
1. Determine tooling required to perform the necessary tasks illustrated on the part print
2. Change fixturing scheme if necessary
3. Mount work piece
4. Install cutting tools
5. Measure cutting tools
Cut and inspect part.
1. Learn machine’s control panel layout and functions using the manufacturer’s operation manual
2. Learn to use single block mode
3. Determine tooling required to inspect the finished part
4. Make oversize/undersize trial cuts
5. Inspect trial cuts
6. Adjust tool offsets as required
7. Learn to use automatic cycle mode
8. Inspect the finished part