ASEP 103 - Manual Drive Trains and Axles Level 1

1. Complete general Manual Drive Train and Axles Level 1 NATEF tasks as listed below.
   1. Research applicable vehicle and service information, fluid type, vehicle service history, service precautions, and technical service bulletins.
   2. Drain and refill manual transmission/transaxle and final drive unit.
   3. Check fluid condition; check for leaks.
2. Completes Level 1 NATEF tasks related to Clutches as listed below.
   1. Check and adjust clutch master cylinder fluid level.
   2. Check for system leaks.
3. Complete Level 1 NATEF tasks related to Transmission/Transaxle as listed below.
   1. Describe the operational characteristics of an electronically-controlled manual transmission/transaxle.
4. Complete Level 1 NATEF tasks related to Drive Shaft, Half Shafts, Universal and Constant-Velocity (CV) Joints as listed below.
   1. Inspect, remove, and replace front wheel drive (FWD) bearings, hubs, and seals.
   2. Inspect, service, and replace shafts, yokes, boots, and universal/CV joints.
5. Complete Level 1 NATEF tasks related to Differentials as listed below.
   1. Clean and inspect differential housing; check for leaks; inspect housing vent.
   2. Check and adjust differential housing fluid level.
   3. Drain and refill differential housing.
6. Complete Level 1 NATEF tasks related to Drive Axles as listed below.
   1. Inspect and replace drive axle wheel studs
7. Complete Level 1 NATEF tasks related to Four-wheel Drive/All-wheel Drive as listed below.
   1. Inspect front-wheel bearings and locking hubs.
   2. Check for leaks at drive assembly seals; check vents; check lube level.